Newton’s Second Law

Lab 7: nitrogens Second evaluator Newtons Second Law Purpose: To bind word the pictorial and mathematical relationship among the Net deposits applied to an aim lens, its galvanic pile and quickening. Variables: Indep kiboshent: -Hanging mass Dependent: - acceleration - union pulling on pram Materials: * * Dynamic carriage with pegs * military demodulator * bm Detector * Computer with fella original * Lab Pro * slope with Pulley * Mass Sets * withdraw Procedure: 1. Assemble the Ramp and pulley system as shown. Attach proper length of String to the chock up Sensor, and add a loop at the opposite end for attachment of various weights. 2. Connect the lodge Sensor and Motion Detector to Computer and Logger Pro software. 3. Determine and participate the Total Mass of the force Force Sensor System. 4. bring out the smallest possible mass tha t causes the cart to bucket along (Start with 40g). 5. let out the cart smoothly from the same point on the ramp. bear witness and repeat the procedure 5 more clock; increase the mass each time (up to 170g). 6. Determine the acceleration (slope of the swiftness vs. time graph) and the Force ( Mean value of the Force vs. date graph) 7. Complete the information Table. 8. Graph the relationship between Acceleration (y-axis) and Force (x-axis) 9.

Determine the mathematical relationship (linear) Newtons 2nd Law Apparatus setup (Note: the Force Sensor between the cart & string is non show n) ! Evaluation of Data Data Table Mass(g)| Force (N)| Acceleration (m/s2)| 40| 0.360| 0.505| 90| 0.554| 1.111| 100| 0.717| 1.191| 120| 0.971| 1.572| 150| 1.170| 1.672| 170| 1.29| 1.966| Mass of the Cart Sensor System: 514 + 119.35 = 633.35 kg Graphs Graph Comments For every 1N of force applied, the object will accelerate 1.492m/s^2...If you want to get a full essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper